3D printing workflow
55
Dual PRO Extruder
Mount the toolhead following the steps from
.
Prepare the material.
The 2 spools (2x 0.5 kg)
of filament are included
in the package (full set).
Take out the filament
rolls from the plastic foil,
remove moisture absorb-
er.
You can find out what
kind of filament you
own by looking at the
sticker on the filament
roll. ZMorph VX package
comes with 0.5 kg white
and 0.5 kg silver PLA
materials.
Slide spools on the bar
and place it on the ma-
chine.
Push the filament down
until you feel it has been
grabbed by extruder drive
gear.
Wait until the material
flows out of the nozzle.
Tap the feed button
again if necessary.
NOTE:
By tapping the button showing "80 mm" you can change the amount of extruded
filament to 15 or 5 mm.
