ZETRON 748, Technical Manual

Page: 75 / 259

Programming
025-9368H 61
dispatch only (repeater operation) and one user (radio) for both interconnect and dispatch operation
using multi-digit ANI.
Before starting these examples, go to the Diagnostic menu and reset the System database (item 2)
and User databases (item 3) to factory default.
Items that have been changed are in bold in the example menus.
Interconnect Only
Our interconnect only user has three items changed from default: Enabled is set to “Yes”,
CTCSS/DCS decode and CTCSS/DCS encode are both set to “100.0 Hz”. Notice also that this is User
1; Short sign-on users should be placed in the low end of the database.
INTERCONNECT USER MENU
1 - User range: 1 16 - Call limit time: 03 mins
2 - Enabled: Yes 17 - Call detail logging: All
3 - Access ANI: * 18 - Toll restrictions: Blap
4 - Answer type: * 19 - Interconnect privacy: Repeat
5 - Disconnect ANI: # 20 - Scheduled telco access: Disabled
6 - Equipment type: Mobile 21 - Courtesy tone: Disabled
7 - Mobile-to-phone: Enabled 22 - Mobile ringout: High warble
8 - Phone-to-mobile: Enabled 23 - Page forward user: None
9 - Mobile-to-mobile: Disabled 24 - Autodial mode: 00
10 - ANI Mobile-repeat: Disabled 25 - Hookflash mode: Disabled
11 - Selcall format: None 26 - Mobile activity timer: Enabled
12 - Selcall capcode: 27 - Interconnect hog mode: Disabled
13 - CTCSS/DCS decode: 100.0 28 - List users (in user range)
14 - CTCSS/DCS encode: 100.0 29 - Airtime - Accumulate: 00:00:00
15 - CTCSS/DCS drop: No
<ESC> to exit
Select a command:
This user is now set up for Short sign-on; Mobile-to-Phone. Program a DTMF equipped radio for the
proper transmit and receive frequencies that correspond to the repeater that the Model 748 is
installed on. Set the CTCSS encode and decode for 100.0 Hz.
Key up and send a DTMF “*” for greater than 500 msec. Unkey. Model 748 will key the transmitter
and the seize the phone line. You should hear dial tone from the Central Office. Dial a local
telephone number. You should now be in conversation mode. Key up an send a DTMF “#” for
greater than 500 msec. Model 748 will send five short disconnect beeps and drop the transmitter.
Call into the Model 748, when the line is answered the Overdial prompt tone will be issued (default
is an 925 Hz beep tone); overdial 01 (001 for Roamer), the Model 748 will key the transmitter and
start sending ringing tones and encoding 100.0 Hz. Key up and send a DTMF “*” for greater than
500 msec to answer. You should now be in conversation mode. Key up and send a DTMF “#” for
greater than 500 msec. The Model 748 will send five short disconnect beeps and drop the
transmitter.