ZETRON 748, Technical Manual

Page: 171 / 259

Feature Set Reference
025-9368H 157
Reset System Database / User Database to Factory Default
These two commands will reset the Model 748 to factory default settings. They have been split into
separate commands to allow maximum flexibility when it becomes necessary to execute them. It is
considered good practice to execute these commands as the first step in programming a unit for a
new installation. This then clears out any forgotten users or parameters that could cause undesired
results later.
CAUTION:
These commands are irreversible. Once executed they cannot be undone.
How to execute it:
Access the Model 748 through your direct connected PC or terminal, or remotely from your PC
connected to a modem via the Model 748's internal modem.
Reset System database:
Once connected to the Model 748 and the Main Menu is on the screen, type “5” and press
ENTER
,
the Diagnostic Menu will be displayed. Select the item number for Reset System database to factory
default and press ENTER .
You will be prompted for conformation, type “Y” to confirm or “N” to abort.
Reset User database:
Once connected to the Model 748 and the Main Menu is on the screen, type “5” and press ENTER ,
the Diagnostic Menu will be displayed. Select the item number for Reset User database to factory
default and press
ENTER
. You will be prompted for select either “Interconnect” or “Repeater Panel”
user database. Press the space bar to change or ENTER to accept.
You will be prompted for conformation, type “Y” to confirm or “N” to abort.