ZETRON 748, Technical Manual

Page: 214 / 259

Feature Set Reference
200 025-9368H
User Range
User range sets the user number whose data is currently displayed in the Interconnect User Menu.
This command selects the particular user whose data you wish to view or program. This can be a
single user or a block or range of users.
Once a user range has been selected, it remains unchanged until you exit or terminate the
programming session. This means you can set
User range to the desired user, and go back to another
menu to verify or change a setting. When you return to the User Menu, it will display the same user.
The User range may be set to anything, as long as the starting and ending users are within the
specified range (1-154) and the starting user number is lower than the ending user number.
To select a single user, enter the user number at the prompt for “Starting user” and press ENTER . At
the second prompt “Ending user” just press ENTER . The Repeater Panel User Menu will be re-
printed with the selected user's data.
To select a range or block of users, enter the lower user number at the prompt for “Starting user” and
press
ENTER
. At the second prompt “Ending user”, enter the higher user number and press
ENTER
.
The Interconnect User Menu will be re-printed using the “Starting user” data.
B
LOCK OR
R
ANGE PROGRAMMING
: The Model 748 supports block or range programming of most
items in the User menu. You can set them one at a time or set the whole block or range with the
same setting.
When you have a range of users specified and select a command that supports block programming,
the Model 748 will prompt you as to whether you want to program all of them (in the user range) in
one keystroke, or if you would like to review and alter each of them individually. If you elect to let
the Model 748 program them all without reviewing them, it will change all of the users in the user
range and give you a prompt when it is finished. If you would like to program a certain parameter for
a range of users, but you want them to be different, the Model 748 will show you each user one-at-a-
time and allow you to change each independently from the other users. If you decide you don't want
to continue, press CTRL-C to abort.
The user that is displayed is the first user in the range. This user is called the “current user”. If you
execute a command that can only be programmed one user at a time, only the current user will be
changed.
How to program it:
Access the Model 748 through your direct connected PC or terminal, or remotely from your PC
connected to a modem via the Model 748's internal modem.
Once connected to the Model 748 and the Main Menu is on the screen, type “2” and press ENTER ,
and the Repeater Panel Menu will appear. Type “2” and press ENTER , the Repeater Panel User
menu will be displayed using the currently selected user's data. Select the item number for User
range and press
ENTER
. The current starting user number will be displayed, along with a prompt
instructing you to enter a starting user number. Type the first user number you wish to program and
press
ENTER . The ending user number will then be displayed, along with a prompt instructing you