ZETRON 748, Technical Manual

Page: 159 / 259

Feature Set Reference
025-9368H 145
Mobile Ringout
There are four different styles of ringing tones that may be sent to the mobile when a call is made.
There are two warble type ringouts, “High warble” and “Low warble”. The “High warble” sounds
like an electronic telephone ring. The “Low warble” has the same cadence, but lower in pitch or
tone. It sounds more like a regular telephone ringing. The two other type of ringouts are “Ding
dong” and “Singer”. The “Ding dong” is a High tone followed by a low tone similar to a door bell.
The “Singer” is a two higher tones that have a lower “beat” frequency to give a warble quality to it.
The ability to send different ringing types can be useful in many applications. One possibility is the
supervisor or service personnel who monitors the channel. A unique ringout style would alert him
that the a call was intended for him. Another possibility is multiple users in a user group. Each could
have a different ringout, but everyone on the same sub-audible tone. Each user in the group would
know who the call was intended for and could even answer for them if desired.
How to program it:
Access the Model 748 through your direct connected PC or terminal, or remotely from your PC
connected to a modem via the Model 748's internal modem.
Once connected to the Model 748 and the Main Menu is on the screen, type “1” and press
ENTER
,
and the Interconnect Menu will appear. Type “3” and press ENTER , the User Menu will be
displayed using the currently selected user's data. Select the User number you wish to program (see
“User Range” later in this section). Select the item number for
Mobile ringout and press
ENTER
.
The currently selected mode or state will be shown along with a message instructing you to press the
space bar to change the mode or state, and to press
ENTER
to accept the current mode or state. Each
time the space bar is pressed, the mode or state changes. Once the mode or state you desire is
displayed, press
ENTER to accept it. Note that if you accidentally pass the mode or state you want,
keep pressing the space bar and the Model 748 will wrap around (when the last choice is displayed,
it will return to the first one).
The default setting for all users is “High warble” ringout style.
Mobile ringout is supported by block or range programming. See “User Range” later in this section
for details.