ZETRON 748, Technical Manual

Page: 119 / 259

Feature Set Reference
025-9368H 105
read than “14258206363”. Text is valid also but there is still a maximum of 16 characters per
autodial location.
Autodial mode
Once connected to the Model 748 and the Main Menu is on the screen, type “1” and press
ENTER
,
and the Interconnect Menu will appear. Type “3” and press ENTER , the Interconnect User menu will
be displayed using the currently selected user's data. Select the User number you wish to program
(see “User Range” later in this section). Select the item number for
Autodial mode followed by
ENTER . The currently selected “Autodial block” will be displayed (this is the first digit of Autodial
mode ). Select 1 to 9 for a block of ten or 0 for all 99 autodials and press ENTER . The currently
selected “Autodial number” will be displayed (with the updated “Autodial block” on the line above
it). Select 1 to 9 for a forced autodial or 0 for all ten in the selected block.
Application Note:
The large number of autodials combined with the ability to limit or select a block of autodials for
individual users can be a powerful tool. When selling interconnect service to an individual or user
group, the dealer can include a block of ten autodials specific for that customer.
Another powerful use is the forced autodial. When the Model 748 sees a specific ANI, a specific
phone number can be dialed, or an ANI to phone number translation. This can be an emergency
number for a user group or a way of reaching a dead beat customer who is not returning phone calls.