ZETRON 748, Technical Manual

Page: 139 / 259

Feature Set Reference
025-9368H 125
Enabled
The Enabled command is used to turn users on and off. Regardless of how the user has been
programmed, access will be totally denied to the interconnect until the user has been Enabled.
How to program it:
Access the Model 748 through your direct connected PC or terminal, or remotely from your PC
connected to a modem via the Model 748's internal modem.
Once connected to the Model 748 and the Main Menu is on the screen, type “1” and press
ENTER
,
and the Interconnect Menu will appear. Type “3” and press ENTER , the User menu will be displayed
using the currently selected user's data. Select the User number you wish to program (see “User
Range” later in this section). Select the item number for Enabled and press
ENTER
.
The currently selected mode or state will be shown along with a message instructing you to press the
space bar to change the mode or state, and to press
ENTER
to accept the current mode or state. Each
time the space bar is pressed, the mode or state changes. Once the mode or state you desire is
displayed, press
ENTER to accept it. Note that if you accidentally pass the mode or state you want,
keep pressing the space bar and the Model 748 will wrap around (when the last choice is displayed,
it will return to the first one).
Enabled is supported by block or range programming. See “User Range” later in this section for
details.
How to program it using DTMF:
Using DTMF either over the air, on the telephone line, or through the local telephone port, enter the
program mode using the program access code (default is 12748).
Enter: 101# (beep beep)
Enter: [uuu = user number] # (beep beep)
Enter: [0 = disable, 1 = enable] # (beep beep beep beep beep)
Exit programming mode:
Enter: 99# (beep beep beep beep beep)
The default setting for Enabled is “No” or disabled for all users except User #1, who defaults to
“Yes” or enabled.
Application Note:
Customers that have delinquent accounts can be disabled using this command and enabled later. By
doing this, you don't have to reprogram the user's parameters, you simply re-enable the user when
the account is settled.