ZETRON 748, Technical Manual

Page: 209 / 259

Feature Set Reference
025-9368H 195
Morse ID
Each tone or code in the Model 748's Repeater Panel can be assigned an individual Morse ID. This
can be up to 8 characters in length. The interval at which the ID is sent is controlled by the
ID rate in
the Repeater Panel System Menu. The Model 748 issues the ID during the transmit hold time once
the
ID rate timer has expired. The ID is transmitted at 20 wpm (words per minute), which is the
default setting for ID speed .
How to program it:
Access the Model 748 through your direct connected PC or terminal, or remotely from your PC
connected to a modem via the Model 748's internal modem.
Once connected to the Model 748 and the Main Menu is on the screen, type “2” and press
ENTER
,
and the Repeater Panel Menu will appear. Type “2” and press
ENTER
, the Repeater Panel User
menu will be displayed using the currently selected user's data. Select the User number you wish to
program (see “User Range” later in this section). Select the item for
Morse ID and press ENTER .
The current Morse ID will appear along with a message instructing you enter a new ID. Type in the
new ID and press
ENTER
when you are done.
To clear a Morse ID , simply type “ ” (press the space bar) followed by ENTER .
The default for all users is no Morse ID programmed.