ZETRON 748, Technical Manual

Page: 136 / 259

Feature Set Reference
122 025-9368H
DTMF-t Reset Time
This command is used to set the duration of the Reset tone or digit for the DTMF-t Selcall format.
This is the tone or digit transmitted at the end of a transmission to “reset” the mobile's decoders. The
reset tone or digit is also sent as the first tone or digit on a phone to mobile call. The duration can be
set in 100 millisecond increments from 100 milliseconds to 5000 milliseconds (5 seconds).
This tone or digit is defined on a system wide basis using the DTMF-t Reset digit command.
See “DTMF-t Signaling” in Section 7.
How to program it:
Access the Model 748 through your direct connected PC or terminal, or remotely from your PC
connected to a modem via the Model 748's internal modem.
Once connected to the Model 748 and the Main menu is on the screen, type “1” and press
ENTER
,
the Interconnect Menu will be displayed. Type “1” and press ENTER , the Mobile System menu will
be displayed. Select the item number for DTMF-t Reset time and press ENTER . The current timing
will be shown along with a message showing the range of data that can be entered. Enter the new
timing value and press
ENTER to accept.
The default setting for DTMF-t Reset time is 1000 milliseconds (10).