ZETRON 748, Technical Manual

Page: 81 / 259

Programming
025-9368H 67
Using the Terminal in MS Windows
The Terminal Application that comes in Microsoft Windows V3.1 can be used to communicate with
the Model 748. It can be used for programming or used to perform file transfers. The default location
for Terminal is in the Access folder.
Configuration:
Start Terminal by double clicking on its icon.
Open the Settings menu, select Binary Transfers, set this parameter to X
MODEM
.
Open the Settings menu, select Terminal Emulation, set this parameter to DEC VT100 (ANSI).
Open the Settings menu, select Communications, set the following parameters:
Baud rate = 2400
Data bits = 8
Stop bits = 1
Parity = None
Flow Control = Xon/Xoff
Com Port = the port your modem is connected to or configure for
These parameters set up the basic rules of communication between the modem and your PC.