ZETRON 748, Technical Manual

Page: 155 / 259

Feature Set Reference
025-9368H 141
Maximum Regenerated Digits - Minimum Regenerated Digits
These two parameters are part of the International or “Custom” Toll restrict plan . They are used to
set the minimum and maximum length of a valid phone number. They are only in effect when Toll
restrict plan is set to “Custom”.
Please see “Enhanced Toll Restriction” in Section 3.
How to program it:
Access the Model 748 through your direct connected PC or terminal, or remotely from your PC
connected to a modem via the Model 748's internal modem.
Once connected to the Model 748 and the Main Menu is on the screen, type “1” and press
ENTER
,
the Interconnect menu will be displayed. Type “2” and press ENTER , the Telco System Menu will
be displayed. Select the menu item for Maximum regenerated digits or Minimum regenerated digits
and press
ENTER
. The current setting will appear along with a message instructing you to enter the
new value and the range of values you may enter. Enter the new value and press ENTER when you
have finished.
How to program it using DTMF:
Using DTMF either over the air, or on the telephone line, enter the program mode using the program
access code (default is 12748).
Minimum regenerated digits
Enter: 146# (beep beep)
Enter: [2 to 7] # (beep beep beep beep beep)
Maximum regenerated digits
Enter: 147# (beep beep)
Enter: [7 to 30] # (beep beep beep beep beep)
Exit programming mode:
Enter: 99# (beep beep beep beep beep)
The default setting for Maximum regenerated digits is 15.
The default setting for Minimum regenerated digits is 4.