ZETRON 748, Technical Manual

Page: 168 / 259

Feature Set Reference
154 025-9368H
Phone-to-Mobile
When the Model 748 answers a phone line, the caller is prompted to overdial a number to select the
mobile he wishes to call. For a mobile to receive phone originated calls,
Phone-to-mobile must be
“Enabled”.
See “Telephone-to-Mobile Calls” in Section 3 for a detailed description of phone-to-mobile
operation.
How to program it:
Access the Model 748 through your direct connected PC or terminal, or remotely from your PC
connected to a modem via the Model 748's internal modem.
Once connected to the Model 748 and the Main Menu is on the screen, type “1” and press ENTER ,
and the Interconnect Menu will appear. Type “3” and press ENTER , the User Menu will be
displayed using the currently selected user's data. Select the User number you wish to program (see
“User Range” later in this section). Select the item number for
Phone-to-mobile and press ENTER .
The currently selected mode or state will be shown along with a message instructing you to press the
space bar to change the mode or state, and to press
ENTER to accept the current mode or state. Each
time the space bar is pressed, the mode or state changes. Once the mode or state you desire is
displayed, press
ENTER
to accept it. Note that if you accidentally pass the mode or state you want,
keep pressing the space bar and the Model 748 will wrap around (when the last choice is displayed,
it will return to the first one).
The default for all users is “Enabled” for Phone-to-mobile privileges.
Phone-to-mobile is supported by block or range programming. See “User Range” later in this section
for details.