ZETRON 748, Technical Manual

Page: 118 / 259

Feature Set Reference
104 025-9368H
Autodials - Autodials Mode
The Model 748 has 99 autodial or speed dial locations that can be programmed. Autodials can be
used as part of the Toll restrictions for a user or as a convenience feature for frequently dialed
numbers.
The specific autodial(s) any user (radio) has access to is configured by the Autodial mode in the
Interconnect User Menu. This can be set to give access to 1, 10 or 99 autodials. Autodials can also
be part of the toll restrictions for a user. Setting Toll restricts to “AutoD” limits mobile-to-phone
calls to only programmed autodials. If a user has any toll restrictions in effect, then “empty” or
unprogrammed autodials are considered toll restricted and will not be allowed.
Valid digits (digits that will be dialed) are 0..9, *, #. An additional character “,” can also be included
to insert a pause or delay (default pause time is 2.5 seconds) before continuing with dialing the
number. The maximum number of digits in an autodial is 16.
Autodial mode determines for each user which autodials he has access to. This is a two digit number
indicating which autodials a user has access to. The first digit indicates which block of ten (1 to 9) or
0 for all. The second digit indicates which individual autodial (1 to 9) in that block or 0 for all in that
block. For example a user with Autodial mode set to “20”, has access to 10 autodials (20 - 29). A
user with Autodial mode set to “23” is forced to autodial #23. A user with Autodial mode set to “00”
has access to all 99 autodials plus last number redial (Autodial 00).
To use the autodials, a mobile will access the Model 748 as programmed for a Mobile-to-Phone call.
When the mobile hears dial tone (from the local central office) he keys up and sends “*” followed by
the autodial number. For users who have access to a block of ten it is a single digit. For users who
have access to all autodials, it is a two digit number.
To take advantage of the forced autodial mode, set that users Autodial mode to a single autodial.
When this user accesses the Model 748, the autodial number indicated in Autodial mode is dialed
immediately.
How to program it:
Access the Model 748 through your direct connected PC or terminal, or remotely from your PC
connected to a modem via the Model 748's internal modem.
Autodial Tables
Once connected to the Model 748 and the Main Menu is on the screen, type “1” and press ENTER
and the Interconnect Menu will be displayed. Type “4” and press ENTER and the first of 3 Autodial
Tables will be displayed (33 autodials per screen). Select the autodial you wish to program (1 to 99)
and press ENTER . The currently programmed number in the selected autodial location will be
displayed. Enter the new autodial number and press ENTER when you have finished. The screen to
which that autodial appears will be reprinted if not already displayed.
To clear or delete an autodial, select the autodial as above and simply press the space bar for the first
character and then press
ENTER
.
Alphanumeric characters are valid in autodial, however only “0..9”, “*”, “#” and “,” will be dialed.
This can be useful for making the telephone numbers easier to read “1 (425) 820-6363” is easier to