ZETRON 748, Technical Manual

Page: 130 / 259

Feature Set Reference
116 025-9368H
Dialout Mode
When placing a Mobile-to-Phone call, the Model 748 regenerates the telephone number using either
Touch-Tone (DTMF) or Pulse dialing. There are two speeds for Touch-Tone or DTMF. Pulse
dialing is at 10 pps (pulses per second) and two Break/Make ratios.
Choices for Dialout mode are: “DTMF 5dsp” (5 digits per second or 100mSec on/off timing),
“DTMF 10dps” (10 digits per second or 50mSec on/off timing), “Pulse 60/40” (10 pulses per second
at 60mSec break / 40mSec make), and “Pulse 67/33” (10 pulses per second at 67mSec break /
33mSec make).
In most installations in North America, DTMF will be the choice. If pulse dialing is used, “Pulse
60/40” will work in North America and other areas that have compatible equipment. “Pulse 67/33”
will work in areas that have CCITT compatible equipment (Europe, Australia and Hong Kong)
How to program it:
Access the Model 748 through your direct connected PC or terminal, or remotely from your PC
connected to a modem via the Model 748's internal modem.
Once connected to the Model 748 and the Main Menu is on the screen, type “1” and press ENTER .
The Interconnect Menu will be displayed. Type “2” and press ENTER to get the Telco System
Menu. Select the item number for Dialout mode and press
ENTER
.
The currently selected mode or state will be shown along with a message instructing you to press the
space bar to change the mode or state, and to press
ENTER
to accept the current mode or state. Each
time the space bar is pressed, the mode or state changes. Once the mode or state you desire is
displayed, press
ENTER to accept it. Note that if you accidentally pass the mode or state you want,
keep pressing the space bar and the Model 748 will wrap around (when the last choice is displayed,
it will return to the first one).
The default Dialout mode is “DTMF 5dps”.