Zeiss 000000-1080-349, Instructions For Use Manual

Page: 248 / 278

System Data S100 / OPMI pico
Version 7.0
Page 248 G-30-1781-en
Electromagnetic immunity for non-life-supporting ME equipment
and ME systems
The device S100 / OPMI picois intended to be operated in one of the electro-
magnetic environments specified below. The customer or the user of the de-
vice S100 / OPMI pico is responsible for ensuring that it is operated in such an
environment.
Interference re-
sistance
Tests
IEC 60601
test level
Compliance level Electromagnetic environment -
Guidelines
Portable and mobile radio communication
equipment should not be used closer to the de-
vice S100 / OPMI pico, including cables, than the
recommended safety distance that is calculated
using the equation applicable to the transmis-
sion frequency involved.
Recommended safety distance:
Conducted RF dis-
turbances as de-
scribed in
EN 61000-4:-6 3 V
actual value
150 kHz to 80 MHz
3V
Radiated RF distur-
bances as de-
scribed in
EN 61000-4:-3 3 V
actual value
80 MHz to 2.5 GHz
3 V/m
where P is the output power rating of the trans-
mitter in watts (W) according to the transmitter
manufacturer's specifications and d is the rec-
ommended safety distance in meters (m). The
field strength of stationary transmitters as deter-
mined by a site survey should be
a
less than the
compliance level in all frequency ranges.
b
Interference may occur in the vicinity of equip-
ment marked with the following symbol.
Note 1 At 80 MHz and 800 MHz, the higher frequency range applies.
Note 2 These guidelines may not apply in all situations. Electromagnetic propagation is influ-
enced by absorption and reflection by structures, objects and persons.
d 1 2 P
,
=
for 80 MHz to 800 MHz
for 800 MHz to 2.5 GHz
d 1 2 P
,
=
d 2 3 P
,
=