Zeiss 000000-1080-349, Instructions For Use Manual

Page: 24 / 278

Safety Measures S100 / OPMI pico
Version 7.0
Page 24 G-30-1781-en
Symbols and labels on the S100
Symbols and labels on support and suspension arm
1 Friction symbol
Explanation of the braking effect that is achieved by turning the friction
control.
- Turn left: Reducing the braking effect
- Turn right: Increasing the braking effect
2 "Risk of crushing" warning label
Fingers may be crushed. Do not touch this area while moving the surgical
microscope or parts of it.
3 Brightness setting
If the light source is turned on, the brightness can be continuously set by
turning the brightness control of the fiber illumination:
- Turn left: Minimum brightness
- Turn right: Maximum brightness
4 "Maximum load" warning label
The maximum load on the suspension arm must not exceed 7 kg.
5 Balance of suspension arm
After all accessories have been attached to the surgical microscope, this
adjustment screw can be used to set the balance of the suspension arm.
- Turn left: Reduce weight
- Turn right: Increase weight
max. 7 kg