Zeiss 000000-1080-349, Instructions For Use Manual

Page: 198 / 278

Operation S100 / OPMI pico
Version 7.0
Page 198 G-30-1781-en
2 Network share
Host IP: 192.168.0.10 (external computer)
Share name: recording
Work group: (or domain name)
User name: zeiss
Password: recording
3 Streaming
Client IP: 192.168.0.255 (broadcast or single client IP address)
Port: 5004 (normally does not have to be changed)
You can stream to a single receiver (client IP) by indicating a single IP ad-
dress. But the stream can also be transmitted to several receivers at the
same time if you use the broadcast address of your network area as the
client IP. In addition, each receiver must set up the connection via RTSP.
Use broadcast only in a cable-connected network and not to WLAN re-
ceivers.
If streaming is active in the S100 / OPMI pico, the following URL can be
used in the video software (additional software may be required):
URL: rtsp://192.168.0.11:8554/video
You only have to adjust the IP address or replace the name configured in
the Domain Name System (DNS).
You can read out the IP address of the surgical microscope using the "IP
Address" button even if DHCP is active (see Page 195).
4 Web control / Web interface
URL: http://192.168.0.11
(Port 80 must not be entered)
You can read out the IP address of the surgical microscope using the "IP
Address" button even if DHCP is active (see Page 195).
If a name has been saved in your Domain Name System (DNS), you can
also use this name instead of the IP address.
If you have any questions, contact your IT Administrator.