Zeiss 000000-1080-349, Instructions For Use Manual

Page: 154 / 278

Operation S100 / OPMI pico
Version 7.0
Page 154 G-30-1781-en
You can select under "AUDIO CONFIRMATION" if there shall be an acoustic
feedback (signal tone) when pressing the foot switch.
– Enabled
Acoustic return signal is activated.
– Disabled
Acoustic return signal is deactivated.
FACTORY SETTINGS This submenu allows resetting the user and camera settings to the factory set-
tings. To do this, proceed as follows:
• In the "SERVICE ", use the control keys to select menu item "FACTORY
SETTINGS" and press the "enter" key.
• Use the control keys to select one of the following items:
– RESET USER 1
– RESET ALL USERS
– RESET CAMERA
 After selection of one of the menu items, a message informs you that
the stored data will be overwritten.
• Press the "enter" key to overwrite the settings.
 The system returns to the SERVICE MENU after approx. 2 seconds.
• If you do not want to save any changes, select menu item "CANCEL" to
return to the SERVICE MENU.
VERSION INFORMATION
This submenu shows the current versions of the hardware and software com-
ponents as well as the serial numbers of the camera and CCU. Proceed as fol-
lows:
• Select menu item "VERSION INFORMATION" and press the "enter" key.
The following information is displayed:
– SOFTWARE (software version of the CCU)
– S/N CCU (serial number of the CCU)
• Press the "enter" key to return to the SERVICE MENU.