Zeiss 000000-1080-349, Instructions For Use Manual

Page: 157 / 278

Version 7.0
G-30-1781-en
Page 157
S100 / OPMI pico Operation
Proceed as follows to select a mode and to load the respective configuration:
• Press the <config> key for approx. 5 seconds to access the installation
menu.
• Select the menu item "HDTV MODE" in the installation menu using the
control keys and press the <enter> key.
 The following menu appears:
*only in case of an optional 1080p version
In order to use the optional 1080p resolution, a 1080p compatible display de-
vice must be connected.
• Select the desired mode with the control keys.
 The selected choice is displayed with an arrow.
 At the lower end of the screen, it is explained which video signal is at
which video output.
• Press the <enter> key to save the changes.
 If no 1080p compatible display device is connected, the display re-
mains black and the HDTV sub menu is displayed again after approx.
30 seconds. No changes have been made.
 If a 1080p compatible display device is connected, the prompt "APPLY
CHANGES" appears.
• Select YES or NO with the control keys and confirm the selection with
the <enter> key.
 When you chose "YES", the camera resolution is changed and you go
back to the installation menu.
HDTV MODE
 720P
1080P*
1080I*
CANCEL
DVI/HDMI -> 720P - 1080P* - 1080I*
YPbPr -> 720P - 1080I*