Zeiss 000000-1080-349, Instructions For Use Manual

Page: 144 / 278

Operation S100 / OPMI pico
Version 7.0
Page 144 G-30-1781-en
Proceed as follows to select a exposure measurement type and to load the re-
spective configuration:
• Press the <config> key to access the configuration menu.
• Select the menu item "LIGHTMETER" in the configuration menu using the
control keys and press the <enter> key.
 The following menu appears:
• Select the desired mode with the control keys.
 The selected choice is displayed with an arrow.
 The selected mode is explained at the lower end of the display.
• Press the <enter> key to save the changes.
 The selection is saved and you return to the configuration menu.
• If you do not want to save your changes, return to the configuration menu
via the "CANCEL" menu item. The exposure type is set as it was when the
sub menu was accessed.
LIGHTMETER
 SMALL SPOT
LARGE SPOT
INTEGRAL
CANCEL
USE ENTIRE SCENE AVERAGE FOR BRIGHTNESS METERING