Zeiss 000000-1080-349, Instructions For Use Manual, Page: 230 / 278

Care and Maintenance S100 / OPMI pico
Version 7.0
Page 230 G-30-1781-en
Sterilization
The asepsis sets available from ZEISS contain rubber caps and hand grips that
can be sterilized in autoclaves. For detailed information on sterilization, please
see the enclosed instructions "Preparation of resterilizable products" for the
respective asepsis set.
You can also use disposable sterile drapes to cover the system.
• When fitting the sterile drape, ensure there is sufficient slack to allow for
movement of the microscope carrier and surgical microscope.
• Do not cover the ventilation opens - this ensures the lamps are cooled ad-
equately and no lamp fails.
Disinfection
The maximum concentrations are:
– For alcohol (tested with 2 propanol): 60%
– For aldehyde (tested with glutaraldehyde): 2%
– For quaternary compounds (tested with DDAC): 0.2%
NOTE Risk of damaging the paint on the device!
• Use a disinfectant based on aldehyde or alcohol. The addition of quater-
nary compounds is acceptable.
To avoid damaging the surfaces, do not use any disinfecting components
other than those specified below.