Zeiss 000000-1080-349, Instructions For Use Manual

Page: 12 / 278

Safety Measures S100 / OPMI pico
Version 7.0
Page 12 G-30-1781-en
• Do not touch the system if your body is electrostatically charged and the
system is not grounded.
• A potential equalization connector (see IEC 60601-1:2005) is provided on
the connector panel. This connector is optional for halogen and Xenon il-
lumination. This connector can be used for placing other active devices at
the same ground potential or for redundant grounding to protective
earth.
• Please note the information on EMC (electromagnetic compatibility) in the
chapter "System Data" on Page 245.
Transport & Service
• The device may only be moved over long distances (e.g. relocation, return
for repair etc.) in its original packaging or in special return packaging.
Please contact your dealer or ZEISS Service.
• This system is a high-grade technological product. To ensure optimum
performance and safe working order, we recommend having it checked
by our service representative as part of regular scheduled maintenance.
• In order to prevent any impairment of the device's safety due to age,
wear, etc., the user must ensure that the device is subjected to the neces-
sary safety checks (see section "Care and Maintenance").
Optics and light • Never look into a light source or the sun with the binocular tube, the ob-
jective lens or an eyepiece.
• Never directly look into the light source, e.g. a microscope object lens or
a light guide to avoid phototoxic damages to the eyes.
• Adjust the brightness at the stand. Start with the lowest brightness and
slowly increase it to the required but not more than the allowed bright-
ness.
• With increasing age of the light source, the actual illumination intensity
delivered at the respective setting decreases (this is a normal property of
the system).