Zeiss 000000-1080-349, Instructions For Use Manual

Page: 245 / 278

Version 7.0
G-30-1781-en
Page 245
S100 / OPMI pico System Data
EMC (electromagnetic compatibility)
The device is subject to specific precautions with regard to electromagnetic
compatibility (EMC). In order to avoid the occurrence of EMC interference, the
device may only be installed, operated and maintained in the manner indi-
cated in these Instructions for Use and only with components supplied by
ZEISS.
CAUTION Danger from electromagnetic radiation
Electrical devices can influence each other as a result of their electromagnetic
radiation. The use of non-approved components (accessories, transformers
of all types, cables) can cause increased emissions or reduce the device's im-
munity.
• With the exception of the combination of the devices described in these
Instructions for Use, do not operate the device in direct proximity to other
devices.
• Only use accessories, transformers, cables and spare parts which are
specified in these Instructions for Use or which are approved by ZEISS for
this device.
• Do not use any portable or mobile RF communication equipment near
the device as it is not possible to exclude the possibility that the function
of the device will be affected.
• Please follow the EMC guidelines in the following pages.