Zeiss 000000-1080-349, Instructions For Use Manual

Page: 214 / 278

What to do in the event of malfunctions S100 / OPMI pico
Version 7.0
Page 214 G-30-1781-en
No image, video indicator
lamp is lit If a video recorder is con-
nected between CCU and
monitor: Defective video re-
corder. Connect CCU and monitor di-
rectly. Page 110
Defective CCU or camera
head in surgical microscope,
or defective connecting cable
between CCU and surgical
microscope. Contact service. –
Image too dark,
snow effect on monitor. Monitor not correctly set. Set monitor to default status, or
increase brightness and contrast. Please refer
to monitor's
Instructions
for Use.
Brightness of video unit set
too low. Increase brightness of video unit. Page 167
Surgical field illumination too
dark. Increase brightness of illumina-
tion. Page 70
Image too bright,
Milky image on monitor Monitor not correctly set. Set monitor to default status, or
reduce brightness and/or con-
trast. Please refer
to monitor's
Instructions
for Use.
Brightness of video unit is set
too high. Reduce brightness of video unit. Page 167
Surgical field illumination too
bright. Reduce brightness of surgical
field illumination. Page 70
ENT application: Image de-
tail in black speculum too
bright, too shiny Video unit: Lightmeter function - set "Small Spot" Page 82
Brightness of CCU set too
high. Reduce brightness of video unit. Page 167
Brightness control is based on
black color of speculum. Center the speculum and object
in center of screen. –
Use a metal speculum (gray,
stainless steel). –
Problem Possible cause Remedy Cross
reference