Zeiss 000000-1080-349, Instructions For Use Manual

Page: 91 / 278

Version 7.0
G-30-1781-en
Page 91
S100 / OPMI pico Preparations for use
Configuring the surgical microscope
CAUTION Risk of injury due to sinking surgical microscope or due to dropping
parts!
Mounting and removing modules and accessories may lead to unintended
tilting of the surgical microscope. Parts or modules may drop.
The suspension arm may be dropped or lifted.
This may lead to personal injuries or to material damage.
• Please only use accessories approved by ZEISS.
• Never change modules and accessories during a surgical procedure or
above the patient!
• Mount documentation accessories only in accordance with the appropri-
ate instructions for use.
• After every change in configuration and before every use, make sure that
the modules and accessories are securely locked in position.
• Make sure that all securing screws and locking screws are tightened firm-
ly!
• Make sure not to exceed the maximum load capacity of the device during
the installation of accessories and components.
• Readjust the balance of the suspension arm after every change of acces-
sories (see Page 103).
• Readjust the adjustment screw for mobility. The adjustment screw has
only a braking, no locking function.
WARNING Danger of tipping due to overloading!
The mounting and removal of accessories may lead to unintentional tipping
of the surgical microscope.
• Make sure that the maximum permissible load on the suspension arm is
not exceeded.