Stereo Deluxe Microscope
Page <1>
14/04/09 V1.0
http://www.farnell.com
http://www.newark.com
http://www.cpc.co.uk
Features:
•
This deluxe stereo microscope is suitable for non-contact inspection and incorporates
high quality optics giving standard magnification of either 20x or 40x by simply rotating
the objective turret.
Specifications:
Two 10x magnification wide field eye pieces.
Two rubber eye cups for fitting to eye pieces.
Eye pieces mounted at 45 degrees in microscope head.
Microscope head can be turned through 360 degrees.
Eye piece width adjustment 50 to 75mm.
2x and 4x objective lenses.
Objective lenses mounted in a revolving turret with positive click stops.
Microscope provides 20x and 40x viewing magnification.
Focal distance between base of turret and work piece = 63mm.
Field of view at 20x magnification = 10mm.
Field of view at 40x magnification = 5mm.
Maximum working height between stage plate and objective lens turret = 94mm.
Rack and pinion adjustment = 50mm.
Two sided stage plate with black/white faces 95mm diameter.
Opaque glass stage plate 95mm diameter.
On/off power switch.
Four position illumination switch : off, I = bottom, II = top, III = both.
Two specimen clips.
Plastic dust cover.
Primary voltage 230V ac.
Secondary voltage 12V, 6W.
Instructions For Use
Carefully unpack the microscope from its fitted shipping box.
Remove the protective plastic bag which covers the microscope.
Place the microscope onto a solid work bench.
Fit the rubber eye cups to the eye pieces.
Remove the plastic disc from below the objective lens turret.
Connect the 3 pin plug to the requires electric mains supply.
Rotate the objective lens turret to positively engage either the 2x or 4x position.
Place the work piece onto the selected stage plate.
Position the microscope head approximately 63mm above the surface of the work piece.
Select required illumination.
