Zanotti un0 010, Workshop Manual

Page: 202 / 248

7-191
7.1 Parameters - Single
temperature version
Annex 1
7 Annex 1
7.1 Parameters - Single temperature version
Regulation Parameters Table
Label Description Udm Value
dF1 1st Diesel intervention Differential
°C °F
2 4
dF2 1st Stand-by intervention Differential °C °F 3 5
ddF 2nd Engine speed Differential °C °F 3 5
min
Lower temperature set-point limit °C °F -30
-22
MAS Higher temperature set-point limit °C °F 25 77
tAP After Start Glow Plug Active Time sec 3
SAG Anti-Freeze Setting °C °F 10 50
dAG
Anti-Freeze Differential °C °F 5
9
tgv Condenser Fan Delay sec 3
SP1 Setpoint 1 °C °F 15 60
SP2 Setpoint 2 °C °F 5 40
SP3
Setpoint 3 °C °F 2
35
SP4 Setpoint 4 °C °F -25 -13
Stf Set Point Freeze °C °F -5 23
Stmc Safety Set Point °C °F -27 -16
dFmc
Safety Set Point Differential °C °F 2
4
Defrost Parameter Table
Label Description Udm Value
tEb Temperature alarm cut out time after defrost min 60
tMS
Maximum defrosting time min 15
tPS End defrost detection type - air switch
tGo Draining time min 0
tSS Time between defrost operations min 120
btS
Temperature detection stop during defrost - OFF
Svb Evaporator fans state during defrost - OFF
trE Evaporator fans activation delay after defrost min 1