Zanotti un0 010, Workshop Manual, Page: 139 / 248

128
Electronics and wiring
5.1 Cab Command
Driver Mode enables a short menu with temperature set,
manual defrost and alarm visualization allowed only.
(cc)
To Quit from Driver Mode press and hold together 2
nd
( SET ) and 3
rd
(no label) buttons from left.
(dd)
Press SET button to enable password input.
(ee)
Trough buttons select 4 (Driver Password).
(ff)
Press SET button to confirm.
(gg)
Press PROG to exit from driver mode.
SET Temperature Set-point Menu
(hh)
Press SET button to setup cold-room temperature.
Single temperature
(ii)
Press or hold " + " or " - " button to setup cold-room
temperature.
(jj)
Press BACK returning to home page.
Multi temperature
(kk)
Use to choose editable room temperature,
press or hold " + " or " - " button to setup temperature
value.
(ll)
Press BACK returning to home page.