York YCAL0019, Installation Operation & Maintenance, Page: 107 / 200

FORM 150.67-NM2 (209)
107
JOHNSON CONTROLS
5 5
GENERAL
Weights of speci fi c chiller models vary signi fi cantly as
options are added. As a result, total weights, weights at
individual isolator positions, and actual isolator selection
at each position cannot be published due to the vast
number of possible combinations. This information
will be available when the specific chiller/ option
selection is made from the local YORK sales of
fi ce.
Be aware, weights may change with each option along
with possible isolator changes. Weights and isolators
may need to be recalculated when the option selections
are changed.
Whenever the isolator option is ordered, the isolators
will be shipped loose with the chiller. Packed with the
isolators and also in the control panel information packet
is a drawing and table speci
fi cally for each chiller, based
on the option selection. The drawing and table will be
similar to the ones shown below. The drawing will show
the isolator locations along with the weight in pounds
and kilograms at the speci
fi c location, isolator position,
and location measurements for each isolator.
WEIGHT DISTRIBUTION AND ISOLATOR MOUNTING POSITIONS
YCAL0019 – 0033 (WITHOUT PUMP PACKAGE OPTION)
LOCATION
X D I S T A N C E
INCHES / MM
Y D I S T A N C E
INCHES / MM
VENDOR NUMBER
OPERATING WEIGHT
LBS / (kg)
R1 43.22 (1097.8) 4.94 (125.5) CIP-B-450 / RED 276 (125.2)
L1 1.09 (27.7) 4.94 (125.5 CIP-B-450 / RED 284 (128.8)
R2 43.22 (1097.8) 92.25 (2343.2) CIP-B-276750 / WHITE 407 (184.6)
L2 1.09 (27.7) 92.25 2343.2) CIP-B-750 / WHITE 418 (189.6)
“SAMPLE PRINTOUT” TYPICAL OF THE INFORMATION SUPPLIED IN THE ISOLATOR PACKAGE AND IN THE CHILLER
PANEL LITERATURE PACKET
Order No: 069528190101
Line No: 1
Unit Shipping Wt.
(Display on unit data
nameplate)
kg lbs
617 1361
ISOLATOR LOCATIONS
L1
L2
R1
R2
CONTROL
PANEL END
Y Y
C C
G G
X X
ISOLATORS