manualshive.com logo in svg

YOKOGAWA WT210, User Manual, Page: 87 / 316

Share
Download
YOKOGAWA WT210 User Manual Download Page 87

4-19

IM 760401-01E

Setting Measurement Conditions and Measurement Range

4

Setting the Averaging Sample Number/Attenuation Constant

The following selections are available.  The initial value is “8”.

8, 16, 32, or 64

Setting Averaging ON/OFF

Select the averaging menu once again after having set the averaging values.  The

initial value is oFF.

• on: Selecting on and pressing the ENTER key will start averaging and the AVG

indicator will light.

• oFF: Selecting oFF and pressing the ENTER key will stop averaging and the AVG

indicator will extinguish.

Note

•

The average coefficient is common to exponential average and moving average.  If you

change the averaging process, change the averaging coefficient also.

•

The averaging function that can be used during harmonic measurement is exponential

averaging.  The attenuation constant is fixed to 8.  Therefore, the setup procedure explained

in this section is valid only during normal measurement.

•

The averaging function turns OFF when integration is started.  It does not turn back ON even

if integration is stopped and reset.

4.7  Using the Averaging Function

Summary of Contents for WT210





























































































































































































































































































































Reviews:

No comments