manualshive.com logo in svg

YOKOGAWA WT210, User Manual, Page: 6 / 316

Share
Download
YOKOGAWA WT210 User Manual Download Page 6

iv

IM 760401-01E

NO. (Instrument Number)

When contacting the dealer from which you purchased the instrument, please give

them the instrument number.

Standard Accessories

The standard accessories below are supplied with the instrument.  Check that all

contents are present and that they are undamaged.

Name

Part No.

Q’ty

Description

1. Power cord

See the

1

–

previous page

2. Power fuse

A1347EF

1

250 V, 1 A, time lag
(attached to the fuse holder)

3. 24-pin connector

A1004JD

1

For remote control and D/A output
(provided only on options /DA4, DA12, and /
CMP)

4. Current input

B9317CY

1

For the WT210

protective cover

B9317GY

1

For the WT230

(cover appropriate for the model provided)

5. Rubber feet for the

A9088ZM

1

Two pieces in one set.  One set provided.

hind feet

6. User’s Manual

IM760401E-01 1

This manual

6.

5.

4.

3.

2.

D

F

R

1. (One of the following power cords is supplied according to the 
     instrument's suffix codes.)

Q

For the WT210

For the WT230

Checking the Contents of the Package

Summary of Contents for WT210





























































































































































































































































































































Reviews:

No comments