YOKOGAWA WT210 User Manual Download Page 3

Page: 3 / 316

IM 760401-01E

3rd Edition: April 2004 (YK)

Thank you for purchasing the YOKOGAWA WT210 or WT230 Digital Power Meter.

This user’s manual contains useful information about the functions, operating

procedures, and handling precautions of the instrument. To ensure correct use, please

read this manual thoroughly before beginning operation.

After reading the manual, keep it in a convenient location for quick reference whenever a

question arises during operation.

Notes

• The contents of this manual are subject to change without prior notice as a result of

continuing improvements to the instrument’s performance and functions. The figures

given in this manual may differ from the actual screen.

• Every effort has been made in the preparation of this manual to ensure the accuracy

of its contents. However, should you have any questions or find any errors, please

contact your nearest YOKOGAWA dealer.

• Copying or reproducing all or any part of the contents of this manual without the

permission of Yokogawa Electric Corporation is strictly prohibited.

Trademarks

• Adobe and Acrobat are trademarks of Adobe Systems Incorporated.

• Company and product names used in this manual are trademarks or registered

trademarks of their respective holders.

Revisions

• First Edition: June 2002

• Second Edition: August 2002

• Third Edition: April 2004

Summary of Contents for WT210





























































































































































































































































































































Search results

Summary of Contents for WT210

Reviews:

YOKOGAWA WT210, User Manual, Page: 3 / 316

Search results

Summary of Contents for WT210

Reviews: