YOKOGAWA WT210 User Manual Download Page 229

Page: 229 / 316

14-13

IM 760401-01E

Communication Commands 2 (System of Commands Complying to the IEEE 488.2-1992 Standard)

Command

Description

Page

:MEASure[:NORMal]:ITEM:{TIME|MATH}

Sets/queries the ON/OFF state of the communication output of

{integration time|MATH}

14-31

:MEASure[:NORMal]:ITEM:<normal measurement function>?

Queries communication output settings of the normal measurement function. 14-31

:MEASure[:NORMal]:ITEM:<normal measurement function>[:ALL]

Sets the communication output items concerning all elements or S ON/

OFF at once.

14-31

:MEASure[:NORMal]:ITEM:<normal measurement function>:ELEMent<x>

Sets/queries the communication output items concerning each element

ON/OFF.

14-31

:MEASure[:NORMal]:ITEM:<normal measurement function>:SIGMa

Sets/queries the communication output items concerning S ON/OFF.

14-31

:MEASure[:NORMal]:VALue?

Queries normal measured/computed data set by commands other than

“

MEASure[:NORMal]:ITEM

” (ASCII format).

14-31

RECall Group

:RECall?

Queries all settings related to recalling data.

14-36

:RECall:INTerval

Sets/queries the recalling interval.

14-36

:RECall:PANel

Retrieves the setup parameters file.

14-36

:RECall[:STATe]

Sets/queries recalling ON/OFF.

14-36

RELay Group

:RELay?

Queries all settings related to the comparator function.

14-37

:RELay:DISPlay

Sets/queries the comparator display OFF, or in case of ON, the channel

to be displayed.

14-37

:RELay:HCHannel<x>?

Queries all settings related to relay output items in case of harmonic

measurement.

14-37

:RELay:HCHannel<x>:FUNCtion

Sets/queries function of the relay output item in case of harmonic measurement. 14-38

:RELay:HCHannel<x>:THReshold

Sets/queries the threshold level for the relay output item.

14-38

:RELay:MODE

Sets/queries the mode of the comparator function.

14-38

:RELay:NCHannel<x>?

Queries all settings related to the relay output items in case of normal

measurement.

14-38

:RELay:NCHannel<x>:FUNCtion

Sets/queries the function of the relay output in case of normal

measurement.

14-38

:RELay:NCHannel<x>:THReshold

Sets/queries the threshold level for the relay output item.

14-38

:RELay[:STATe]

Sets/queries the comparator function ON/OFF.

14-38

SAMPle Group

:SAMPle?

Queries all settings related to sampling.

14-39

:SAMPle:HOLD

Sets/queries to hold the output of data (display, communication).

14-39

:SAMPle:RATE

Sets the display update rate or queries the current setting.

14-39

STATus Group

:STATus?

Queries all settings related to the status of communication.

14-40

:STATus:CONDition?

Queries the contents of the condition filter.

14-40

:STATus:EESE

Sets/queries the extended event register.

14-40

:STATus:EESR?

Queries the contents of the extended event register and clears it.

14-40

:STATus:ERRor?

Queries the occurred error code and message.

14-40

:STATus:FILTer<x>

Sets/queries the transit filter.

14-40

:STATus:QMESsage

Sets/queries whether or not to apply the corresponding message to the

query “

STATus:ERRor?

”.

14-41

:STATus:SPOLl?(Serial Poll)

Executes serial polling.

14-41

14.3 Commands

Summary of Contents for WT210





























































































































































































































































































































Search results

Summary of Contents for WT210

Reviews:

YOKOGAWA WT210, User Manual, Page: 229 / 316

Search results

Summary of Contents for WT210

Reviews: