YOKOGAWA WT210, User Manual, Page: 5 / 316

iii
IM 760401-01E
Checking the Contents of the Package
Unpack the box and check the contents before operating the instrument. If some of the
contents are not correct or missing or if there is physical damage, contact the dealer
from which you purchased them.
WT210/WT230
Check that the model name and suffix code given on the name plate on the right side
panel when facing the front panel match those on the order.
WT210 (model: 760401) WT230 (model code: 760502, 760503)
Made in Japan
SUFFIX
MODEL
NO.
Made in Japan
SUFFIX
MODEL
NO.
Made in Japan
SUFFIX
MODEL
NO.
MODEL and SUFFIX codes
Model SUFFIX Description
760401 ............................................. WT210 Single-phase model (single input element
model)
760502 ............................................. WT230 Three-phase, three-wire model (two input
element model)
760503 ............................................. WT230 Three-phase, four-wire model (three input
element model)
Supply Voltage ............................................. 100-120 VAC/200-240 VAC
Communication interface -C1 ..................... GP-IB interface
(One of the two is built-in -C2 ..................... Serial (RS-232-C) interface
(applies to the WT230))
Power cord -D ....................... UL/CSA Standard power cord (Part No.: A1006WD)
[Maximum rated voltage: 125 V; Maximum rated
current: 7 A]
-F ....................... VDE Standard Power Cord (Part No.: A1009WD)
[Maximum rated voltage: 250 V; Maximum rated
current: 10 A]
-Q ....................... BS Standard Power Cord (Part No.: A1054WD)
[Maximum rated voltage: 250 V; Maximum rated
current: 10 A]
-R ....................... AS Standard Power Cord (Part No.: A1024WD)
[Maximum rated voltage: 240 V; Maximum rated
current: 10 A]
Options
Communication interface /C1 GP-IB interface
(One of the two is provided /C2 Serial (RS-232-C) interface
(applies to the WT210))
External sensor input function /EX1 2.5, 5, and 10 V range
(One of the two is provided.) /EX2 50, 100, and 200 mV range
Harmonic measurement function /HRM –
External I/O function /DA4 4-channel D/A output (applies to the WT210)
(One of the three is provided.) /DA12 12-channel D/A output (applies to the WT230)
/CMP
4-channel comparator, 4-channel D/A output
Ex: Three-phase, three-wire model, GP-IB interface, UL/CSA Standard power cord, external
sensor input for 50, 100, and 200 mV range, harmonic measurement function, and 12-
channel D/A output
→
760502-C1-D/EX2/HRM/DA12