manualshive.com logo in svg

YOKOGAWA WT210, User Manual, Page: 57 / 316

Share
Download
YOKOGAWA WT210 User Manual Download Page 57

3-8

IM 760401-01E

3.5

Connecting the Power Supply

Before Connecting the Power

To prevent the possibility of electric shock and damage to the instrument, follow the

warnings below.

WARNING

• Before connecting the power cord, ensure that the source voltage matches the

rated supply voltage of the WT210/WT230 and that it is within the maximum

rated voltage of the provided power cord.

• Connect the power cord after checking that the power switch of the instrument is

turned OFF.

• To prevent the possibility of electric shock or fire, always use the power cord

supplied by YOKOGAWA.

• Make sure to perform protective grounding to prevent the possibility of electric

shock.  Connect the power cord to a three-pin power outlet with a protective

earth terminal.

• Do not use an extension cord without protective earth ground.  Otherwise, the

protection function will be compromised.

Connecting the Power Cord

1.

Check that the power switch is OFF.

2.

Connect the power cord plug to the power connector on the WT210/WT230.

(Use the power cord that came with the package.)

3.

Connect the plug on the other end of the power cord to the outlet that meets the

conditions below.  The AC outlet must be of a three-pin type with a protective

earth ground terminal.

Item

Specifications

Rated supply voltage*

100 to 120 VAC/200 to 240 VAC

Permitted supply voltage range

90 to 132 VAC/180 to 264 VAC

Rated supply voltage frequency

50/60 Hz

Permitted supply voltage frequency range

48 to 63 Hz

Maximum power consumption

WT210: 35 VA, WT230: 55 VA

*

The WT210/WT230 can use a 100-V or a 200-V system for the power supply.  The maximum
rated voltage of the power cord varies depending on its type.  Check that the voltage supplied
to the WT210/WT230 is less than or equal to the maximum rated voltage of the provided
power cord (see page iii) before using it.

WT210/WT230

3 pin consent

Power cord
(included in the package)

Summary of Contents for WT210





























































































































































































































































































































Reviews:

No comments