Home
/
YOKOGAWA
/
WT210
/
User Manual

YOKOGAWA WT210, User Manual, Page: 295 / 316

Share

Page: 295 / 316

YOKOGAWA WT210 User Manual Download Page 295

15-17

IM 760401-01E

Maintenance and Troubleshooting

15

15.6 Recommended Replacement Parts

The one-year warranty applies only to the main unit of the instrument (starting from the

day of delivery) and does not cover any other items nor expendable items (items which

wear out). The replacement period for expendable items varies depending on the

conditions of use. Refer to the table below as a general guideline. Contact your nearest

YOKOGAWA dealer for replacement parts.

Parts Name

Specifications and Recommended Replacement Period

Current input relay (WT210 only)

This is the relay used to switch the current input circuit. The specifications
of the relay are as follows:
• Electric switching life: Approx. 50,000 times (at rated capacity).
• Mechanical life: Approx. 1,000,000 times.

Comparator function relay

This relay operates in the comparator mode. It is provided only on models
with the /CMP option. The specifications of the relay are as follows:
• Rated contact capacity: 24 V/0.5 A.
• Electric switching life: Approx. 500,000 times (at rated capacity).
• Mechanical life: Approx. 100,000,000 times.

Backup battery

3 years

(Lithium battery)

«
...
293
294
295
296
297
...
»

Summary of Contents for WT210





























































































































































































































































































































Reviews:

No comments