YOKOGAWA UP750, User Manual

Page: 98 / 130

6-6
<Toc> <6. Parameters>
IM 05E01B02-41E
6.2 Lists of Parameters
This section describes the functions of parameters briefly. In addition, each parameter table
has a “User Setting” column, where you can record your setpoints when setting them in the
controller.
* Parameters relating to PV or program setpoints should all be set in real numbers.
For example, use temperature values to define program setpoints and PV event
setpoints for temperature input.
* The “User Setting” column in the table is provided for the customer to record setpoints.
* The column “Target Item in CD-ROM” in the table provides references from User’s
Manual (Reference) (CD-ROM version) which describes items in more detail and
items that are not contained in this manual.
* Numbers in ( ) are the parameter setpoints that apply when the communication func-
tion is used. ex. AUTO1 (0), MAN1 (1).
■
Operation Mode Parameters
Located in:
MODE
key (
MODE
key on the instrument’s front panel)
Parameter
Symbol
Name of Parameter Setting Range and Description Initial Value
Pause of program
operation Set as “HOLD = ON” to enable the hold mode of program operation.
Advance of segment Set as “ADV = ON” to advance from the current segment to the next segment.
Local-mode
operation Set as “LOC = ON” to switch from program operation or RESET mode to local-mode operation.
User
Setting
Target Item
in CD-ROM
Ref.5.2(5)
Ref.5.2(7)
Ref.5.2(9)
ᎏ
ᎏ
HOLD
ADV
LOC
1
AUTO/MAN
switching To switch between AUTO and MAN:
To switch to AUTO mode, set as “MODE: AUTO1 (0)”.
To switch to MAN mode, set as “MODE: MAN1 (1)”.
Start-of-program
segment number 1 to 99
Program operation begins with the segment whose number is specified
by this parameter.
SST is automatically set to the initial value “1” when the controller is in
RESET or LOCAL mode.
A/M1
SST
1st Edition : May 31,2000-00