YOKOGAWA UP750, User Manual

Page: 58 / 130

3-22
<Toc> <3. Programming>
IM 05E01B02-41E
Maximum value of PV input range (RH1)
100%
Minimum value of PV input range (RL1)
0%
Define this parameter when
using the controller as a program
pattern generator. See User’s
Manual (Reference) (CD-ROM
version) for more information.
Time setting (TIME) when
the Segment Setting Method
(SEG.T) parameter is set as
SEG.T = 0; ramp setting
(TM.RT) when the parameter
is set as SEG.T = 1
Factory-set to Time
setting (TIME).
Unit
4
5
8
System name
Program No.
Program name
Model
Serial No.
UP750 -
Segment No.
Final target setpoint 1 (TSP1)
Final target setpoint 2 (TSP2)
Segment time (TIME/TM.RT)
PID number (PID)
Event number (EV8)
PV event type (TY8)/on time of time event (ON8)
PV event setpoint (PE8)/off time of time event (OFF8)
Junction code (JC)
Program time unit (TMU)
Segment setting method (SEG.T)
3
1
2
1 2 3 4 5 6
Event number (EV1)
PV event type (TY1)/on time of time event (ON1)
PV event setpoint (PE1)/off time of time event (OFF1)
Event number (EV2)
PV event type (TY2)/on time of time event (ON2)
PV event setpoint (PE2)/off time of time event (OFF2)
Event number (EV3)
PV event type (TY3)/on time of time event (ON3)
PV event setpoint (PE3)/off time of time event (OFF3)
Event number (EV4)
PV event type (TY4)/on time of time event (ON4)
PV event setpoint (PE4)/off time of time event (OFF4)
Event number (EV5)
PV event type (TY5)/on time of time event (ON5)
PV event setpoint (PE5)/off time of time event (OFF5)
Event number (EV6)
PV event type (TY6)/on time of time event (ON6)
PV event setpoint (PE6)/off time of time event (OFF6)
Event number (EV7)
PV event type (TY7)/on time of time event (ON7)
PV event setpoint (PE7)/off time of time event (OFF7)
Shown for segment PID
parameters when the setup
parameter “ZON” is set to 0.
1. Maximum value of PV input range: Setpoint of the “Maximum Value of PV Input Range (RH1)” setup parameter
2. Minimum value of PV input range: Setpoint of the “Minimum Value of PV Input Range (RL1)” setup parameter
3. PV input unit: Setpoint of the “PV Input Unit (UNI1)” setup parameter
4. Program time unit: Setpoint of the “Program Time Unit (TMU)” setup parameter
5. Segment setting method: Setpoint of the “Segment Setting Method (SEG.T)” setup parameter
6. Starting target setpoint: Setpoint of the “Starting Target Setpoint (SSP1)” program parameter
7. Start code: Setpoint of the “Start Code (STC)” program parameter
8. Final target setpoint, segment time, Events (PV event and Time event) and Junction code: Setpoint of each program parameter
9. Draw the program pattern.
1st Edition : May 31,2000-00