YOKOGAWA UP750, User Manual

Page: 3 / 130

<Toc> <Rev>
i
IM 05E01B02-41E
Introduction
Thank you for purchasing the UP750 program controller.
■
How to Use the Manuals
Purpose Manual Title Description
Setup Describes the tasks (installation, wiring, and others)
required to make the controller ready for operations.
Basic operation
Describes examples of setting PV input types and
control output types. Making settings described herein
and program creation in “3. Programming” allows you to
carry out basic control.
General understand-
ing of programming
operations
Contains a parameter map that serves as a guide to
creating programs. Also includes a brief explanation
of the functions of program parameters.
Program creation
Describes examples of creating basic programs. The
use of the program pattern setup charts included in the
“3.7 Program Pattern Setup Charts” is recommended.
Brief operation
Contains the parameter map used as a guideline for
setting parameters.
Function description
and setpoint
recording Briefly describes the functions of parameters. In addition,
each parameter table has a User Setting column, where
you can record your setpoints when setting them in the
controller.
Operating
procedures
and troubleshooting
Describes key operation sequences. For operation
control through external contact inputs, see “1.5
Terminal Wiring Diagrams.”
1. Installation
2. Initial Settings
3. Programming
3.5 Program Parameter Map
3.6 Lists of Program
Parameter
4. Operations
6.1 Parameter Map
6.2 List of Parameters
■
Controllers Applicable to Single-loop Control
The specification codes of the UP750 applicable to single-loop control are given in the table
below.
UP750-00
UP750-01 UP750-50
UP750-51
■
Regarding This User’s Manual
(1) This manual should be provided to the end user. Keep an extra copy or copies of the
manual in a safe place.
(2) Read this manual carefully to gain a thorough understanding of how to operate this
product before starting operation.
(3) This manual describes the functions of this product. Yokogawa M&C Corporation
(hereinafter simply referred to as Yokogawa) does not guarantee the application of
these functions for any particular purpose.
(4) Under absolutely no circumstances may the contents of this manual, in part or in
whole, be transcribed or copied without permission.
(5) The contents of this manual are subject to change without prior notice.
(6) Every effort has been made to ensure that the details of this manual are accurate.
However, should any errors be found or important information be omitted, please
contact your nearest Yokogawa representative or our sales office.
1st Edition : May 31,2000-00
Media No. IM 05E01B02-41E (CD) 1st Edition : May 2000 (YK)
All Rights Reserved Copyright © 2000, Yokogawa M&C Corporation