YOKOGAWA UP750, User Manual

Page: 38 / 130

3-2
<Toc> <3. Programming>
IM 05E01B02-41E
3.2 Example of Program Pattern Setup Charts
Complete the following setup chart before setting programs in the controller. Filling in the
chart makes it easier for you to input program data into the controller. See “3.7 Program
Pattern Setup Charts.”
In the following chart, fill in the fields with bold-face borders.
1. Maximum value of PV input range: Setpoint of the “Maximum Value of PV Input Range
(RH1)” setup parameter
2. Minimum value of PV input range: Setpoint of the “Minimum Value of PV Input Range
(RL1)” setup parameter
3. PV input unit: Setpoint of the “PV Input Unit (UNI1)” setup parameter
4. Program time unit: Setpoint of the “Program Time Unit (TMU)” setup parameter
5. Segment setting method: Setpoint of the “Segment Setting Method (SEG.T)” setup
parameter
6. Starting target setpoint: Setpoint of the “Starting Target Setpoint (SSP1)” program
parameter
7. Start code: Setpoint of the “Start Code (STC)” program parameter
8. Final target setpoint, Segment time, Events (PV event and Time event) and Junction
code: Setpoint of each program parameter
9. Draw the program pattern.
4
5
Number of repetitions (RCY) Program time unit (TMU)
Segment setting method (SEG.T)
Hour, minute
Time setting
6
7
Starting target setpoint 1 (SSP1) 25
°
C
0
Start-of-repetition segment number (RST)
End-of-repetition segment number (REN)
Starting target setpoint 2 (SSP2)
Start code (STC)
5th group of wait zones (5.WZ1)
5th group of wait times (5.WTM)
4th group of wait zones (4.WZ1)
4th group of wait times (4.WTM)
3rd group of wait zones (3.WZ1)
3rd group of wait times (3.WTM)
2nd group of wait zones (2.WZ1)
2nd group of wait times (2.WTM)
1st group of wait zones (1.WZ1)
1st group of wait times (1.WTM)
See User’s
Manual (Reference)
(CD-ROM version)
for more information.
Define this parameter
when using the
controller as a
program pattern
generator. See User’s
Manual (Reference)
(CD-ROM version) for
more information.
1st Edition : May 31,2000-00