YOKOGAWA UP750, User Manual

Page: 114 / 130

6-22
<Toc> <6. Parameters>
IM 05E01B02-41E
PV unit Set the unit of PV.
% (0): Percent
- (2): No unit
C (1): Degree Celsius F (5): Fahrenheit
Same as the
PV input unit
P.UN1
P.UN2
PV decimal point
position Under normal operation, set the same value as in the PV Input
Decimal Point Position (SDP1) parameter.
To shift the decimal point for temperature input, use this parameter.
For example, set as “P.DP1 = 0” to change a temperature
reading of one decimal place to that of no decimal places.
This involves reconfiguring the P.RH1 and P.RL1 parameters.
0 to 4
-
Maximum value
of PV input
range or scale
Minimum value
of PV input
range or scale
Maximum value
of PV range Under normal operation, keep the values of these parameters
between the maximum and minimum values of the PV input
range.
-19999 to 30000
P.RL1 < P.RH1, where P.RH1-P.RL1
30000
P.DP1
P.DP2
P.RH1
Minimum value of
PV range
P.RL1
P.RH2
P.RL2
Auxiliary analog
input type
(INPUT 3 terminals)
Terminals and
Although not used in single-loop control, it is shown on the display.
Although not used in single-loop control, it is shown on the display.
Although not used in single-loop control, it is shown on the display.
Although not used in single-loop control, it is shown on the display.
Although not used in single-loop control, it is shown on the display.
Auxiliary analog
input unit
Although not used in single-loop control, it is shown on the display.
IN3
UNI3
Maximum value of
auxiliary analog input
range
Although not used in single-loop control, it is shown on the display.
RH3
Minimum value of
auxiliary analog input
range
Auxiliary analog input
decimal point
position
Although not used in single-loop control, it is shown on the display.
RL3
Max. value of auxiliary
analog input scale
Although not used in single-loop control, it is shown on the display.
Although not used in single-loop control, it is shown on the display.
Although not used in single-loop control, it is shown on the display.
SDP3
SH3
Min. value of auxiliary
analog input scale
SL3
Auxiliary analog input
burnout action
selection
Although not used in single-loop control, it is shown on the display.
BSL3
21 22
Parameter
Symbol
Name of Parameter Setting Range and Description Initial Value User
Setting
Target Item
in CD-ROM
Ref.1.1(8)
1st Edition : May 31,2000-00