YOKOGAWA UP750, User Manual

Page: 33 / 130

<Toc> <2. Initial Settings>
2-11
IM 05E01B02-41E 1st Edition : May 31,2000-00
2.
Press the
SET/ENT
key for more than 3 seconds
to call up the main menu “PROG”.
SET/ENT
PT.No RUN RESET
DISP MODE
programming
main menu
PROG
3.
Press the key once to display the main
menu “STUP”.
SET/ENT
PT.No RUN RESET
DISP MODE
password input
main menu
STUP
4.
Press the SET/ENT key once to display the main
menu “PARA”.
SET/ENT
PT.No RUN RESET
DISP MODE
setup parameter
SETUP main menu
PARA
5.
Press the key once to display the main
menu “UPMD”.
SET/ENT
PT.No RUN RESET
DISP MODE
SETUP main menu
UP750 configuration
UPMD
6.
Press the SET/ENT key once to display the
submenu “MD”.
SET/ENT
PT.No RUN RESET
DISP MODE
UP mode set
SETUP sub menu
MD
7.
Press the key twice to display the
submenu “OUT”.
SET/ENT
PT.No RUN RESET
DISP MODE
SETUP sub menu
output set
OUT
8.
Press the SET/ENT key once to display the
parameter “OT1” (control output type).
SET/ENT
PT.No RUN RESET
DISP MODE
SETUP
MENU:UPMD/OUT #1
output 1 select
OT1 = 0
9.
Press the or key to display the
required setpoint. The figure below shows
an example of setting to current output (4
to 20 mA DC).
SET/ENT
PT.No RUN RESET
DISP MODE
MENU:UPMD/OUT #1
changing!
output 1 select
OT1 = 2
Blinks during
change.
10.
Press the
SET/ENT
key once to register the
setpoint.
SET/ENT
PT.No RUN RESET
DISP MODE
SETUP
MENU:UPMD/OUT #1
output 1 select
OT1 = 2