![background image](http://html1.mh-extra.com/html/yealink/yealink-sip-t42g/yealink-sip-t42g_administrators-manual_908386613.webp)
Configuring Advanced Features
593
Parameters
Permitted Values
Default
Menu->Settings->Advanced Settings (default password: admin)
->Network->LLDP->LLDP Status
network.lldp.packet_interval
Integer from 1 to 3600
60
Description:
Configures the interval (in seconds) for the IP phone to send the LLDP (Linker Layer
Discovery Protocol) request.
Note: It works only if the value of the parameter “network.lldp.enable” is set to 1
(Enabled). If you change this parameter, the IP phone will reboot to make the
change take effect.
Web User Interface:
Network->Advanced->LLDP->Packet Interval (1~3600s)
Phone User Interface:
Menu->Settings->Advanced Settings (default password: admin)
->Network->LLDP->Packet Interval
To configure LLDP via web user interface:
1.
Click on Network->Advanced.
2.
In the LLDP block, select the desired value from the pull-down list of Active.
3.
Enter the desired time interval in the Packet Interval (1~3600s) field.
4.
Click Confirm to accept the change.
A dialog box pops up to prompt that settings will take effect after a reboot.
5.
Click OK to reboot the phone.
To configure LLDP feature via phone user interface:
1.
Press Menu->Settings->Advanced Settings (default password: admin)
->Network->LLDP->LLDP Status.
Summary of Contents for Yealink SIP-T42G
