Yealink Yealink SIP-T26P Page 48 User Manual Download

Page: 48 / 150

User Guide for the SIP-T26P IP Phone

The IP phone enters the local directory directly as there is only Local Directory in the
directory by default.

If Local Directory is removed from the directory, press Menu->Directory->Local
Directory to enter the local directory.

Press the Enter soft key.

If the groups have been added to the local directory, select the desired group and
then press the Enter soft key.

Press or to select the desired contact.

Press the Option soft key, and then select Detail from the prompt list.

Press or to switch between different items and then edit.

Press the Save soft key to accept change or the Back soft key to cancel.

To delete a contact from the local directory:

Press the Dir soft key.

The IP phone enters the local directory directly as there is only Local Directory in the
directory by default.

If Local Directory is removed from the directory, press Menu->Directory->Local
Directory to enter the local directory.

Press the Enter soft key.

If the groups have been added to the local directory, select the desired group and

Summary of Contents for Yealink SIP-T26P























































































































































Search results

Summary of Contents for Yealink SIP-T26P

Reviews:

Related manuals for Yealink SIP-T26P

Brands by name

Popular brands

Yealink Yealink SIP-T26P, User Manual

Search results

Summary of Contents for Yealink SIP-T26P

Reviews:

Related manuals for Yealink SIP-T26P

Brands by name

Popular brands