Yealink Yealink SIP-T26P Page 87 User Manual Download

Page: 87 / 150

Basic Call Features

Auto answer is configurable via web user interface at the path Account->Basic.

Note

You can enable auto redial to redial the phone number automatically when the called
party is busy. You can also configure the times settings for auto redial and the time to
wait between redial attempts.

To configure auto redial via phone user interface:

Press Menu->Features->Auto Redial.

Press or , or the Switch soft key to select Enable from the Auto Redial field.

Enter the desired time in the Redial Interval field.

The default time interval is 10s.

Enter the desired times in the Redial Times field.

The default times are 10.

Press the Save soft key to accept the change or the Back soft key to cancel.

Auto redial is configurable via web user interface at the path Features->General
Information.

To use auto redial:

When the called party is busy, the following prompt will appear on the LCD screen of the
phone:

Auto answer is only applicable when there is no other call in progress on the phone.

Summary of Contents for Yealink SIP-T26P























































































































































Search results

Summary of Contents for Yealink SIP-T26P

Reviews:

Related manuals for Yealink SIP-T26P

Brands by name

Popular brands

Yealink Yealink SIP-T26P, User Manual

Search results

Summary of Contents for Yealink SIP-T26P

Reviews:

Related manuals for Yealink SIP-T26P

Brands by name

Popular brands