Yealink Yealink SIP-T26P Page 60 User Manual Download

Page: 60 / 150

User Guide for the SIP-T26P IP Phone

To activate the headset:

Press on the phone.

The HEADSET key LED illuminates solid green when the headset mode is activated.

Press the line

key or the Answer soft key to answer a call. The call will connect to your

headset automatically. Enter the desired number and press the Send soft key, then
the phone will place a call using the headset automatically. For more information on
using the headset to place a call, refer to

Placing Calls

on page

To deactivate the headset:

Press again on the phone.

The HEADSET key LED goes out when the headset mode is deactivated.

You can use headset in priority when enabling headset prior. This feature is especially
useful for permanent or full-time headset users.

To enable headset prior via web user interface:

Click on Features->General Information.

Select Enabled from the pull-down list of Headset Prior.

Click Confirm to accept the change.

To activate the headset mode:

Physically connect the headset.

Summary of Contents for Yealink SIP-T26P























































































































































Search results

Summary of Contents for Yealink SIP-T26P

Reviews:

Related manuals for Yealink SIP-T26P

Brands by name

Popular brands

Yealink Yealink SIP-T26P, User Manual

Search results

Summary of Contents for Yealink SIP-T26P

Reviews:

Related manuals for Yealink SIP-T26P

Brands by name

Popular brands