Yealink Yealink SIP-T26P Page 121 User Manual Download | Manualshive

Page: 121 / 150

background image

Advanced Phone Features

109

Mute is disabled, the microphone works for intercom calls. Intercom Mute is disabled by
default.

Intercom Tone

You can enable or disable the phone to play a warning tone when receiving an
intercom call. If Intercom Tone is enabled, the phone plays a warning tone before
answering the intercom call. If Intercom Tone is disabled, the phone automatically
answers the intercom call without warning. Intercom Tone is enabled by default.

Intercom Barge

You can enable or disable the phone to automatically answer an incoming intercom call
while there is already an active call on the phone. If Intercom Barge is enabled, the
phone automatically answers the intercom call and places the active call on hold. If
Intercom Barge is disabled, the phone handles an incoming intercom call like a waiting
call. Intercom Barge is disabled by default.

You can use multicast paging to quickly and easily forward time sensitive
announcements out to people within the multicast group. You can configure a multicast
paging key on the phone, which allows you to send a Real Time Transport Protocol (RTP)
stream to the pre-configured multicast address(es) without involving SIP signaling. You
can configure the phone to receive an RTP stream from pre-configured multicast
listening address(es) without involving SIP signaling. You can specify up to 10 multicast
listening addresses.

To configure a multicast paging key via phone user interface:

1.

Press Menu->Features->DSS Keys->Memory Keys (or Line Keys).

2.

Select the desired DSS key.

3.

Press or , or the Switch soft key to select Key Event from the Type field.

4.

Press or , or the Switch soft key to select Multicast Paging from the Key
Type field.

5.

Enter the multicast IP address and port number (e.g., 224.5.6.20:10008) in the Value

«
...
119
120
121
122
123
...
»

Summary of Contents for Yealink SIP-T26P























































































































































Reviews:

No comments

Related manuals for Yealink SIP-T26P

Brand: Pantech Pages: 101

Brand: Samsung Pages: 24

Brand: Yealink Pages: 3

Brand: QUO Pages: 16

Brand: Yezz Pages: 23

JOURNEY IS-Q3100

Brand: iSwag Pages: 42

Capsat TT-3060A

Brand: Thrane&Thrane Pages: 182

Brand: Spice Pages: 26

Brand: Olympia Pages: 31

8800 - SMARTPHONE - SAFETY AND

Brand: Blackberry Pages: 8

Brand: Allview Pages: 30

Brand: Grandstream Networks Pages: 2

Brand: G'Five Pages: 6

Brand: Sony Ericsson Pages: 9

Brand: Audiovox Pages: 49

Brand: ESENE Pages: 66

Brand: QUO Pages: 9

Brand: Zte Pages: 60

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands