Yealink Yealink SIP-T26P Page 92 User Manual Download

Page: 92 / 150

User Guide for the SIP-T26P IP Phone

indicates the number of the missed calls) will appear on the LCD screen.

To activate DND in the custom mode for a specific account:

Press the DND soft key when the phone is idle.

The LCD screen displays a list of the accounts on the phone.

Press or to select the desired account.

Press or soft key to select On to activate DND.

Press the Save soft key to accept the change.

The icon appears on the idle screen and the associated line icon changes
to .

Incoming calls on this line will be rejected automatically and "n New Missed Call(s)"
("n" indicates the number of the missed calls) will prompt on the LCD screen.

To activate DND in the custom mode for all accounts:

Press the DND soft key when the phone is idle.

The LCD screen displays a list of the accounts on the phone.

Summary of Contents for Yealink SIP-T26P























































































































































Search results

Summary of Contents for Yealink SIP-T26P

Reviews:

Related manuals for Yealink SIP-T26P

Brands by name

Popular brands

Yealink Yealink SIP-T26P, User Manual

Search results

Summary of Contents for Yealink SIP-T26P

Reviews:

Related manuals for Yealink SIP-T26P

Brands by name

Popular brands