Yealink SIP- T28P User Manual Download Page 90

Page: 90 / 137

Basic Call Features

Press the All Off soft key to disable the call forward.

Press the Save soft key to accept the change.

Dynamic Forwarding

To forward an incoming call to another party:

When the phone is ringing, press the Forward soft key.

Enter the number you want to forward the incoming call to.

Press , , or the Send soft key.

The LCD screen prompts a call forward message.

You can transfer a call to another party in one of the three ways:



Blind Transfer: Transfer a call directly to another party without consulting.



Semi-Attended Transfer: Transfer a call when the target phone is ringing.



Attended Transfer: Transfer a call with prior consulting.

To perform a blind transfer:

Press or the Transfer soft key during a call.

Enter the number you want to transfer the call to.

Press or the Transfer soft key to complete the transfer.

Then the call is connected to the number to which you are transferring.

Summary of Contents for SIP- T28P










































































































































Search results

Summary of Contents for SIP- T28P

Reviews:

Related manuals for SIP- T28P

Brands by name

Popular brands

Yealink SIP- T28P, User Manual

Search results

Summary of Contents for SIP- T28P

Reviews:

Related manuals for SIP- T28P

Brands by name

Popular brands