Yealink SIP- T28P User Manual Download Page 37

Page: 37 / 137

User Guide SIP-T28P IP Phone

To activate the keypad lock via phone user interface:

Press Menu->Settings->Advanced Settings (password: admin) ->Phone Settings->
Lock.

Press or , or the Switch soft key to select the desired type from the Keypad
Lock field.

Press the Save soft key to accept the change.

Long press to lock the keypad immediately when the phone is idle.

The LCD screen prompts “Keypad Locked!” and displays the icon .

If the keypad lock feature is activated to be Lock&Answer, an additional icon
will appear on the LCD screen.

You can configure the interval (in seconds) to automatically lock the keypad instead of
long pressing .

To configure the time out for automatic keypad lock via web user interface:

Click on Phone->Preference.

Enter the desired time in the Phone Lock Time Out (0~3600s) field.

Summary of Contents for SIP- T28P










































































































































Search results

Summary of Contents for SIP- T28P

Reviews:

Related manuals for SIP- T28P

Brands by name

Popular brands

Yealink SIP- T28P, User Manual

Search results

Summary of Contents for SIP- T28P

Reviews:

Related manuals for SIP- T28P

Brands by name

Popular brands